Rack nets change the face of racking

Warrington, Cheshire: Rack Nets back of rack netting will “change the face of racking design” says Warehouse Partners which developed the system.

The nest are fitted to the rear of single runs of pallet racking to form a protective barrier that prevents loads stored within the pallet bays from falling into the aisles during the pallet put-away and retrieval process.

Unlike metal mesh guards which have traditionally been used to fulfill a similar function, Rack Nets netting does not buckle or become misshaped if subjected to the considerable force that can be exerted by a displaced pallet.

This brings cost and safety benefits, says Tim Judge, sales director of Warehouse Partners. “The impact of a palletised load against a metal mesh guard will often cause such damage to the guard that it has to be replaced. Apart from the obvious cost of replacing the guard, this can also mean that the racking aisle cannot be accessed while the repair work is undertaken – which causes significant and costly disruption within the warehouse.”

Rack Nets netting does not buckle or become misshaped by a displaced pallet

“Old-fashioned mesh rack guards are installed in a ‘brickwork’ pattern. They are not designed to hold back full pallet loads – simply to stop loose boxes from falling. If they are hit by a pallet they will usually need to be replaced and, in many cases, if they are hit hard enough they may simply fall off at the moment of impact – with potentially serious consequences for anyone working below.

“Because it is flexible and not of rigid construction, the net mesh spreads the ‘shock’ of the impact of a displaced pallet out to the wire framework and the universal brackets. Rack Nets back of rack netting is almost impossible to damage and will support a displaced pallet until it can be unloaded in an organized manner.”

Rack Nets are made from polypropylene and strong enough to hold a one tonne palletised load. Installers are expected to find Rack Nets back of rack netting far simpler and notably less time consuming to install than traditional mesh guards, Judge says.

“With its unique combination of flexibility and safety, back of rack netting brings a host of business and Health and Safety advantages to the modern warehouse. I believe use of Rack Nets will quickly become accepted as ‘best practice’ in racking system design.”

WORLD NEWS

Idem telematics cold chain verification

Munich, Germany: Idem telematics has simplified cold chain document verification whether the recipient prefers a paper printout or data in different formats as proof. Idem …

READ THE FULL STORY >

Coca-Cola’s Belgian last-mile deliveries go electric

Antwerp, Belgium: Coca-Cola Europacific Partners is to start using 30 electric trucks to make last-mile deliveries in Belgium. The first five Renault trucks will operate …

READ THE FULL STORY >

Envirotainer opens Singapore station

Stockholm, Sweden: Envirotainer has opened a CryoSure station in Singapore to expand availability of ultra-cold (-70°C) medicine transport. The station is near one of the …

READ THE FULL STORY >

Schmitz Cargobull builds hydrogen powered truck

Toddin, Germany: Schmitz Cargobull has bodied a hydrogen-powered Hyundai chassis approved for road transport in Germany. The vehicle was built for Hylane which provides climate-neutral …

READ THE FULL STORY >

© 2022 Global Cold Chain News | Terms and Conditions | Privacy Policy
Commercial Transport Publishing Limited, registered in England and Wales, Company No: 6453302. Registered Office: 7 Diddenham Court, Lambwood Hill, Grazeley, Reading RG7 1JQ