Reefer trailer lock for reefers guards against theft and stowaways

Falmouth, Cornwall, UK: Fridgelock is an adjustable lock for temperature-controlled vehicles.

Fridgelock simply and quickly fits across the locking bars and uses a security nut with a corresponding pocket wrench to lock the doors

The lock simply and quickly fits across the locking bars and uses a security nut and comes with a corresponding pocket wrench to lock the doors. Once in place, the doors cannot be opened.

The driver keeps the wrench in the cab and a spare wrench can also be held back at base in case the trailer is hooked to another tractor.

M1 Marketing, which distributes the patented device reports high demand for the locking devices – particularly from operators on cross-channel routes.

The locking system includes devices for the cargo compartments of rigids and semi-trailers, ambient and refrigerated. There are three locks in the range: Trailerlock, protects the rear doors of trailers and vans to prevent intruders from breaking in, either while moving or at rest in parking areas.

The lock comprises a case, anchoring bolt, security nut and a wrench, plus back-up wrench and anchors to the frame of the trailer so that the door handle cannot be opened. Manufactured from solid steel and simple to operate, the system does not usually require additional modifications to the rear doors of semi-trailers and is quick to install.

Trailerlock fits most trailers and is ideal for international operators or any trailers which are carrying high value goods or likely to be left unaccompanied. For ambient vehicles, if there are pre-existing holes in the trailer rear frame then the lock can simply be fitted without further preparation; if not, holes can be drilled with an 8.5-9mm drill. The fastening bolt is then placed through the frame on the right side of the handle.

Next, the body of the lock is placed onto the handle, so that the fixing bolt passes through the smaller hole in the lock’s body. Using the pocket wrench, the security nut is then attached onto the fixing bolt through the larger hole

For the prevention of spare wheel theft, a new bespoke lock is now available. This simple device which fits over the centre of the spare wheel, also uses a single security nut and again uses a small pocket wrench.

WORLD NEWS

New platform integrates the global supply chain

Chicago, Illinois, US: Project44, which supplies software for end-to-end supply chain visibility, has launched a new platform, Movement by Project44, to link shippers, carriers, logistics …

READ THE FULL STORY >

Peli BioThermal opens service centre In Japan

Tokyo, Japan: Peli BioThermal has opened a service centre in Japan. The new site, near Tokyo’s international Narita Airport, is the latest location to be …

READ THE FULL STORY >

Volvo Trucks starts customer testing fuel cell trucks in 2025

Gottenberg, Sweden: Volvo Trucks is testing fuel cell electric trucks with a comparable range to diesel trucks, up to 1,000 km. A second pilot phase …

READ THE FULL STORY >

Mercedes-Benz all-electric line-up

Hanover, German, Daimler Truck used the IAA Transport show in Hanover to display its electric truck range. Martin Daum, chief executive, Daimler Truck, said: “Since …

READ THE FULL STORY >

© 2022 Global Cold Chain News | Terms and Conditions | Privacy Policy
Commercial Transport Publishing Limited, registered in England and Wales, Company No: 6453302. Registered Office: 7 Diddenham Court, Lambwood Hill, Grazeley, Reading RG7 1JQ